4PC 5PC 6PC NINDEJIN Titanium Stripped Screw Extractor Set Speed Out Damaged Screw Extractor Kit
Product Description
Product Description
Product Details:
1 * plastic case
Remover 0 # diameter 2-3mm
Remover 1 # diameter 3 - 5mm
Remover 2 # diameter 4 - 8mm
Remover 3 # diameter 5 - 10mm
Remover 4 # diameter 6 - 12mm
Applicability: Remove the broken or damaged Screws.
Easy to Use: Just 3 easy steps. Removes every stripped screw in 10 seconds or less!
Material: NINDEJIN double tip damaged screw remover is made of high speed steel 4341; hex shank(single tip) 1/4" is made of high speed steel 4241.
Different Sizes and Types: This screw remover set itself comes with four/five different sizes bits. Two sides can be used. So it can be used on any screw types / size. The hex shank 1/4" Threaded head design for better grip and better use;
Package:
Easy to Use: Just 3 easy steps. Removes every stripped screw in 10 seconds or less!
Material: NINDEJIN double tip damaged screw remover is made of high speed steel 4341; hex shank(single tip) 1/4" is made of high speed steel 4241.
Different Sizes and Types: This screw remover set itself comes with four/five different sizes bits. Two sides can be used. So it can be used on any screw types / size. The hex shank 1/4" Threaded head design for better grip and better use;
Package:
4/5/6 * Screw Extractor Set
1 * plastic case
Remover 0 # diameter 2-3mm
Remover 1 # diameter 3 - 5mm
Remover 2 # diameter 4 - 8mm
Remover 3 # diameter 5 - 10mm
Remover 4 # diameter 6 - 12mm
Specification
Item | |
Material | High Speed Steel |
Quantity | 4PCS/5PCS/6PCS |
Brand | NINDEJIN |
Notice
1. Firstly, using drill head to penetrate drill, be careful not to use the impact hammer gear, with the normal screwdriver gear.
2. Secondly drilling time to the slowest speed, there is a fixed speed with fixed speed, no in the end speed file a certain to be able to evenly rotate.
3. After the volley speed is stable and then aligned with the top of the screw center for a long time. Don't worry, be patient.
4. Then when you obviously felt drilled into and drilled for a while, and then for another.
5. The head rotates, puts the rotating head into the hole just drilled, presses and turns on the electric screws .It can be
removed normally.
6. The whole process reverse operation!
Please confirm the material and the sizes very carefully with the supplier before you place order. Due to different material and the manual measurement, the measurements might have a slight error.
Tips for Using
1. Firstly, using drill head to penetrate drill, be careful not to use the impact hammer gear, with the normal screwdriver gear.
2. Secondly drilling time to the slowest speed, there is a fixed speed with fixed speed, no in the end speed file a certain to be able to evenly rotate.
3. After the volley speed is stable and then aligned with the top of the screw center for a long time. Don't worry, be patient.
4. Then when you obviously felt drilled into and drilled for a while, and then for another.
5. The head rotates, puts the rotating head into the hole just drilled, presses and turns on the electric screws .It can be
removed normally.
6. The whole process reverse operation!
Note:
1. The remover is designed for screws that slide or break the head, and the stuck or rusty screws need to be operated together with the flashlight drill. And the speed should be slow, do not be too high or suddenly speed up.
The whole process needs to reverse the operation, first take one head open, then take the other end out, the success rate of the removal is very high.
2. Hardness at 58 degrees -60 degrees, Wood Screw is no problem (not suitable for steel plate operation)
3. The remover is suitable for orthodontature screws, anti- screws are not applicable
Q: What are the skills for novices?
A: The bit speed can't be too fast, so low speed!Broken wire extractor is double-ended.
Step (1): Drill bit that head first drilling, speed needs to be based on different material settings.
The harder the material, the slower the speed of the drill
Step (2): When the extractor is taken out, the drill should be reversed, and the rotation speed should not be too fast. Otherwise, it is easy to slip the teeth. The extractor should be able to slowly remove the screws.
How to choose a correct screw extractor?
Situation1: If the stripped and damaged screws still has hat(head), you can use single side screw extractor to remove it out, but other Tools are needed, such as a drill bit, to drill a hole in the screw head.
Situation1: If you would like to remove the stripped and damaged screws without hat(head), you can use double sides screw extractor to remove it out, firstly useone side(without thread) to drill a hole on the screw diameter, but needs to choose suitable size(0#,1#,2#,3#,4#), and then use another side(with thread) to drill the damaged screw out.
Both these two situations above need to use reverse.
Packing & Delivery
Shipping & Payment
Company Profile
WHY CHOOSE US?
Choose NINDEJIN brand, you will get premium products with more confidence. Our company was founded in 1999, specializing in manufacturing Metric screws, U.S. screws, a variety of zinc coating and alloy steel accessories with high quality and standard size.
Established for 20 years, well-equipped factories, mature and continuously improving detection techniques, all products meeting industry standard.
Nowadays, the new generation of young people more and more want to make their imaginations come true. NINDEJIN superior toolkit will always provide you professional support and help you succeed.
Certifications
Customer Feedbacks
FAQ
Q: Are you a manufacturing company or a trading company?
A: We are not only specialized in manufacturing fasteners but also experienced in exporting with a history of more than 20 years.
Q: I want to know if you accept orders with small amount of requests?
A: Yes. We have enough stock to satisfy your order, our goods are superior in quality compared with other manufactures. It would be very much appreciated if you place more order to us. We could provide you with a more satisfactory service.
Q: Is it possible if we want some samples for free before placing orders?
A: Yes if we have the products you need in stock, but you might need to pay for the delivery fee. As for customized samples, free samples might not be possible.
Q: Can you produce based on our samples or technical drawings?
A: Yes.
Q: What are the options to proceed payments? Is money transition safe?
A: L/C,D/A,D/P,T/T,Western Union,Money Gram payments are all fine with us. Alibaba.com's built-in order protection service which protects online orders when payment is made through Alibaba.com.
Product Categories : Tools > Broken Screw Extractor
Premium Related Products
Other Products
Hot Products
B7 Rod with Nut B7 Stud with NutFull Range Self Drilling ScrewsL Shape Foundation Bolt Zinc PlatedFoundation Bolt with Washer and Nut L BoltYellow Zinc Plated Screw Type Wedge Anchor BoltsASME B18.2.3.4m Hex Flange ScrewsHex Bolt with Flange (JIS B1189)Nylon Insert Lock Nut Zinc PlatedHexagon Nuts (Plain, Black, Zinc Plated, H. D. G.)Hex Nut (Plain, Black, Zinc Plated, H. D. G.)Fastener / Flat Washer Plain Washer Spring Washer Lock Washer Structural WasherFastener / Hex Nut Flange Nut Nylon Lock Nut Cap Nut Long NutFastener / Hex Bolt Flange Bolt Carriage Bolt U Bolt Foundation Bolt Anchor BoltFastener / Full Thread Rods Threaded Rods Threaded Bar StudsFastener / Anchor Bolt Fix Bolt Drop in Anchor Wedge Anchor Sleeve AnchorSelf Drilling Screw Self Tapping Screw Wood Screw Drywall Screw